Pairing the Bang & Olufsen - Beoplay H4 2nd Gen:

1. Switch on Beoplay H4 2nd Gen. Move the switch to the "I" position to switch on Beoplay H4 2nd Gen. The product indicator light will turn white which indicates that the Beoplay H4 2nd Gen are switched on.

2. Initiate Bluetooth pairing. Move the switch to the top position and hold it there for 2 seconds to initiate Bluetooth pairing. Release the switch when a sound is heard and the indicator starts flashing blue.

3. To Connect to your favourite device, turn on Bluetooth on your device (phone, computer, tablet, etc.) to scan for new devices.

4. Beoplay H4 2nd Gen will appear as an available connection. Tap Beoplay H4 2nd Gen to connect. Your Beoplay H4 2nd Gen is now ready to be used.


Resetting the Bang & Olufsen - Beoplay H4 2nd Gen:

1. Fully charge Beoplay H4 2nd Gen. Connect the included USB cable to the Beoplay H4 2nd Gen and to a charging adapter, and connect the charging adapter to a power supply. After charging the Beoplay H4 2nd Gen for around 2.5 hours, proceed to the next steps.

2.Switch on Beoplay H4 2nd Gen. Move the switch to the "I" position to switch on Beoplay H4 2nd Gen. The product indicator light will turn white which indicates that the Beoplay H4 2nd Gen are switched on.

3. To reset Beoplay H4 2nd Gen, press and hold the vol+ and vol- until the indicator flashes red. Beoplay H4 2nd Gen will switch off once reset is complete.

4. After resetting, you will need to pair your Beoplay H4 2nd Gen to your mobile device again. This means that you need to remove Beoplay H4 2nd Gen from the list of paired Bluetooth devices on your mobile device before adding them again.