Pairing the Bang & Olufsen - Beoplay H9 3rd Gen:

1. Switch on Beoplay H9 3rd Gen. Move the switch to the ON position to switch on Beoplay H9 3rd Gen. The product indicator light will turn white which indicates that the Beoplay H9 3rd Gen are switched on.

2. To initiate Bluetooth Pairing. Move the switch to the top position and hold it for 2 seconds. A blue indicator light will start flashing which indicates that pairing mode is now active, and Beoplay H9 3rd Gen are ready to be connected to your device (phone, computer, tablet, etc.)

3. To Connect to your device, turn on Bluetooth on your device (phone, computer, tablet, etc.) to scan for new devices. Beoplay H9 3rd Gen will appear as an available connection.

4. Tap Beoplay H9 3rd Gen to connect. Your Beoplay H9 3rd Gen are now ready to be used.


Resetting the Bang & Olufsen - Beoplay H9 3rd Gen:

1. Fully charge the Beoplay H9 3rd Gen. Connect the included USB-C cable to the Beoplay H9 3rd Gen and to a charging adapter, and connect the charging adapter to a power supply. After charging for around 2.5 hours, to ensure that they are fully charged, proceed to the next steps.

2. Switch on by moving the switch to the ON position. The product indicator light will turn white which indicates that Beoplay H9 3rd Gen are switched on.

3. To reset Beoplay H9 3rd Gen, move the switch to the top position (Bluetooth icon) and hold the switch for around 10 seconds. When the indicator flashes red for 2 seconds, Beoplay H9 3rd Gen are reset to factory settings (all paired devices are removed).

4. After resetting you will need to pair your Beoplay H9 3rd Gen to your mobile device again. This means that you need to remove them from the list of paired Bluetooth devices on your mobile device before adding them again.